Incinerator for medical facility waste Tracking

Burner for healthcare facility waste observation with the adhering to attributes:

– In high temperatures (pyrolytic burner 2 chambers with temperatures ranging from 950 º C to 1320 º C;

– Ability to harm of 400 to 600kg per hr;

– Efficient in destroying microbes;

– Drain ash;

– Drain needle as well as glass crusher;

– Patio with tap water for hand cleaning and decontamination;

– Observe the issue of environmental high quality standards, discharges fluent as well as policy on the problem of waste; mount big incinerator to one of the largest veterinary health centre in KSA so in the event you will certainly encourage us with a single system (big incinerator) and ecological with onsite training, the capacity for the unit is 2000 Kg for cattle, equines and also farm animals also suitable to all animal waste types, we need it diesel fired.
k). mono ethanolamine.
w). utilized tires.
Reduced intake high performance compact automated burning system.
2nd chamber-1000 deg.C– 1200 Deg.C

Resources Of The Wastes.
l). ETA, MEA waste.
v). solvent chemicals/paint wastes/used glass grains.
q). sludge mix liquid.
d). Dyes as well as intermediate waste.
Low running and upkeep rates.
m). Wastes after treatment of chemicals in etp plant.
Burner must have complying with requirements:.
Producing ash as well as Aeriform fumes which are treated with cyclone type damp scrubber as well as caustic scrubber to create air with contaminants in the allowed variety as well as Non dangerous ash chiefly not organic salts.

Incinerator utilities.
1st chamber-870 Deg.C – – 900 Deg.C.
t).
Thick refractory concrete liner ranked at 1600 C.
Large top opening cover for loading.
Fully automatic and also easy to operate control board.
e).
s). Semi powerful liquid chemical waste.
Wide door for ash removal.
f). Liquid ink waste/acidic deposit.
The twin stage incinerator aids to burn the waste in 2 phases, initially at a medium temperature of 870- 900 Deg C as well as the 2nd point at 1200 deg C.
u).
Advanced gas treatment system to avoid emission of hazardous gases (rubbing system).
r). Slurry/adhesive/grease/ powder finish wastes.
j). amino ethanol.
Capability: 315 KG/HOUR SOLID WASTE/ OR 200 LITRES/HOUR LIQUID WASTE (with double chamber system).
y).
g). insecticides/herbicides/pesticides.

Incinerator utilities.
Burner should have complying with requirements:.
Metallic seal framework with ceramic insulation to stay clear of warm radiation and also control glowing temperature level.
Advanced gas treatment system to avoid emission of hazardous gases (rubbing system).
Reduced intake high performance compact automated burning system.
Low running and upkeep prices.
Fully automatic and also easy to operate control board.
Afterburner Preheat.
Thick refractory concrete lining ranked at 1600 C.
Solid Hearth to enable maximum Fatigue.
Large Leading opening cover for simple loading.
Wide door for ash removal.
Optional Stainless Steel Case.
Warmth recovery option

Categories: